Mounting Frameのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Mounting Frame - メーカー・企業4社の製品一覧とランキング

Mounting Frameの製品一覧

1～7 件を表示 ／ 全 7 件

表示件数
Frame stand (mass production type)

Frame stand (mass production type)

This is an example of a frame (mass production type) assembled using angle-shaped steel materials manufactured by Mitsuya Co., Ltd., along with a top plate and surrounding cover.

This case involves a frame for industrial machinery and equipment. Initially, two units were to be produced, but later an additional 19 units were added. While this is not a particularly difficult type of product for Mitsuya Co., Ltd., producing 19 units in mass production is unusual. Due to the short production period, typically one or two units can be made by one or two people without much difficulty in maintaining quality, but with 19 units, about eight people were involved in the production, which made it a bit challenging to ensure consistent quality. However, since we had already produced the initial two units, we were able to establish processing points and quality standards, allowing us to somewhat unify the quality of the two units and the 19 additional units. Regarding shipping, we initially arranged for a 4-ton truck since the size of the 19 products could fit in one. However, when the transportation company came to inspect the products beforehand, they found that the weight of the 19 units exceeded 3,000 kg. Since a 4-ton truck can only carry a maximum load of 2,750 kg, we realized it would not work and quickly switched to a 10-ton truck to accommodate the shipment.

  • Other machine elements
  • Other machine tools
  • Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Stainless steel custom: Stand/frame (umbrella holder)

Stainless steel custom: Stand/frame (umbrella holder)

We have proposed design changes that are feasible in production and can be kept within appropriate costs.

We would like to introduce a case study of the production of a stand/frame (umbrella stand) requested by a junior high school. Initially, the design provided by the customer was not feasible for stainless steel bending processing, so we contacted the designer and proposed design changes that would be practical for production and fit within an appropriate cost. As a result, the appearance improved, and the traces of processing became invisible. 【Case Study】 ■Product Category: Stand/Frame ■Usage: Umbrella Stand ■Delivery Destination: Junior High School ■Size: 600×1100 ■Materials: Square Pipe, Round Bar ■Material: Stainless Steel 304 ■Finish: Hairline *For more details, please feel free to contact us.

  • Storage

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Scaffold frame

Scaffold frame

This is an introduction to a case study of the frame structure manufactured by Mitsuya Co., Ltd.

This case involves a frame used for inspection and measurement equipment. It is a fabricated product made from 19 pieces of 40×40×2.3t square pipes in four types, three pieces of angles in two types, and nine plates of thick steel measuring 12t, 16t, 22t, and 25t, as well as nine plates of thin steel measuring 2.3t and 3.2t. Although it appears to be a simple fabricated frame in terms of size and shape, the challenge of this product was that three tapped holes were machined on the inner measuring surface of the thick plate attached to the top surface of the frame.

  • Other processing machines
  • Other machine elements
  • Other machine tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] High-precision support frame for semiconductor devices (flatness 0.1)

[Example] High-precision support frame for semiconductor devices (flatness 0.1)

Made with thick square pipes! The installation part is processed to a flatness of within 0.1mm using a gantry machining method.

We would like to introduce the "frame for semiconductor manufacturing equipment" that we have produced. To prevent vibrations during operation, it is made from thick square pipes. The installation area, which supports the aluminum main base, is machined using a gantry machining process to achieve a flatness of within 0.1mm for precision. Our company specializes in the production of frames and structures that have been precision machined using such gantry machining techniques. 【Product Attributes】 ■ Industry: Semiconductor ■ Process: For inspection ■ Size: Overall length 1200 × width 900 × height 650 ■ Precision: ±0.5mm ■ Material: Steel + Coating *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • Other contract services
  • Other semiconductor manufacturing equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Frame stand

Frame stand

This is an introduction to a case study of the fabrication of a canning processing frame made by Mitsuya.

This product is a frame for equipment used in machine tools and industrial machinery. It is welded by combining three types of square pipes and thick plates. Typically, such frame structures consist of an upper square pipe frame that serves as the base for the thick plate on top and a lower square pipe frame on the bottom, which are similar in design. After combining the four square pipes, additional square pipes are inserted between them to form the frame shape. However, this results in the side surfaces of the upper and lower frames having the ends of the square pipes exposed, necessitating the use of end plates to cover these ends, which increases welding labor and consequently raises costs. Therefore, at Mitsuya, we first assemble the square pipe frame for the side sections and insert intermediate square pipes to shape the frame. This allows the exposed ends of the square pipes on the top and bottom to be filled with thick plates, enabling production without increasing the number of components. Since large tapping operations were required on the thick plate surface extending to the square pipes, we ensure high-precision tapping by requesting a cooperating company with a five-sided machining machine to handle the tapping, including for the side and bottom surfaces.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Stainless steel weight rack frame

Stainless steel weight rack frame

Stainless steel frame that is resistant to rust and highly durable [for outdoor use, humid environments, and heavy load support].

Weight storage rack This rack is designed to safely store and organize weights used outdoors. Made of stainless steel, it has high durability and is resistant to rust. This allows it to be used in outdoor or humid environments. The rack frame is designed according to specific needs, so it is important to consider the intended use and installation location when choosing. We have designed it by closely aligning with our customers' requests and conducting on-site inspections.

  • Machinery and equipment installation/dismantling/relocation
  • stainless
  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Large generator frame

Large generator frame

This is a large machine frame product manufactured by Mitsuya Corporation.

As a feature, the size of the completed product when assembled is 5,000mm. It consists of two frames, one with a length of 3,800mm and the other with a length of 1,300mm. The largest welding table in Mitsuya Co., Ltd.'s factory is 5'×10' (1524×3040), so the 3,800mm frame cannot be placed on the table. Since there are many large frames requested by Mitsuya Co., Ltd., workers modify each welding table to accommodate them. Additionally, the welding tables are designed with ample space, ensuring that even if the product extends beyond the table, the safety of surrounding workers is maintained.

  • Generators and transmission motors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.